Ford Ranger Wiper Blade Size by Year (2006-2026)

Rain hits, the wipers smear, and suddenly you need to change your wiper blades, but you don’t know the size of your wipers. The problem is that the Ford Ranger wiper blade size is not one number. It changes with the generation you drive, and the jump is bigger than most people expect. 

So does anyone look up the 2006 Ford Ranger wiper blade size? Then the ute grew, the windscreen changed shape, and the sizes changed with it. That is why the 2007 Ford Ranger wiper blade size and the 2009 Ford Ranger wiper blade size still look like the old truck, while the 2011 Ford Ranger wiper blade size can go two ways depending on when your ute was built. And the 2022 Ford Ranger wiper blade size splits too, because the Next Gen arrived mid-year. 

This guide lays out every front wiper size by generation and chassis code, tells you which pair fits your build year, and shows you how to confirm it in about ten seconds without a tape measure.

Ford Ranger Wiper Blade Sizes by Generation

Here is the full picture in one place. Find your chassis code or your build year, and you have exact-size wipers.

Generation / Chassis	Years	Driver Side	Passenger Side	Rear Wiper
Ranger PJ Ute	2006–2009	18″ / 450mm	18″ / 450mm	None
Ranger PK Ute	2009–2011	18″ / 450mm	18″ / 450mm	None
Ranger PX1 (T6)	2011–2015	24″ / 600mm	16″ / 400mm	None
Ranger PX2 Ute	2015–2018	24″ / 600mm	16″ / 400mm	None
Ranger PX3 Ute	2018–2022	24″ / 600mm	16″ / 400mm	None
Ranger PX4 Next-Gen	2022–2026	25″ / 625 mm	17″ / 425mm	None

Three clear eras. The old Mazda-based Ranger runs a matched 18-inch pair. The T6 Ranger switches to a long driver blade and a short passenger blade. The next-gen adds an inch to both.

PJ and PK 2006 to 2011

The PJ Ranger arrived in Australia in 2006 and ran through to 2009. The PK Ranger followed and ran to 2011. Both use the same 18-inch and 18-inch front pair, the same as the truck before them. So if you are searching for the 2007 Ford Ranger wiper blade size, the 2008 size, or the 2009 size, you are looking for 450 mm blades in a matched pair. Nothing tricky here. The PJ set and the PK set are interchangeable in length.

2011 The Year Everything Changed

2011 is the year to slow down. The PK Ranger was still selling early in the year with its 18-inch pair. The T6-based PX Ranger landed later in 2011 with a completely new windscreen, and it takes a 24-inch driver blade with a 16-inch passenger blade.

Same model year. Two very different pairs. Check your build plate before you buy. If your ute has the boxier old body, you want 18 and 18. If it has the rounded T6 body with the big raked windscreen, you want 600mm and 400mm.

PX1, PX2, and PX3: 2011 to 2022

Ten years of Rangers, one set of sizes. The PX1, the PX2, and the PX3 all run a 24-inch driver blade and a 16-inch passenger blade. Wildtrak, XLT, XL, Raptor, single cab, super cab, and double cab. The windscreen is shared across the range, so the wiper sizes are too.

That consistency covers a huge slice of the utes on Australian roads right now. If your Ranger was built between late 2011 and early 2022, 600 mm and 400 mm are your answers.

2022 Onwards: The Next-Gen PX4

The Next-Gen Ranger went on sale during 2022 with a wider body and a bigger windscreen. The blades grew with it. You now need a 25-inch driver blade and a 17-inch passenger blade.

This is why the 2022 Ford Ranger wiper blade size has two correct answers. An early-2022 PX3 takes 24 and 16. A Next-Gen PX4 takes 25 and 17. One inch sounds small, but a blade that is an inch too long will clip the A-pillar or the windscreen surround on every sweep.

No Rear Wiper on the Ute

Worth saying plainly. Ford Ranger utes do not have a rear wiper. The tray sits behind the cab, so there is no rear glass to clear. If you own a Ford Everest, that is a different vehicle with a different fitment, and it does carry a rear blade.

How to Confirm Your Size in Ten Seconds

Before ordering online or heading to a store, check the fitment chart above to confirm the correct wiper blade size for your Ford Ranger. Just find your year, and the chart will give you the exact sizes you need.

Prefer to check by hand? Open the driver’s door and read the build plate. Your chassis code is printed there: PJ, PK, PX, PX2, PX3, or PX4. That code tells you which row of the table above applies to your ute.

When to Replace Them

Australian conditions are hard on rubber. UV, heat, dust, and long highway runs all shorten blade life. Most Ranger owners get six to twelve months out of a set. Replace them when you see streaking, hear squeaking, or notice a hazy film that will not clear. Do both fronts at the same time. They wear at the same rate, and replacing one just means you are back at it in a month.

Conclusion 

The Ford Ranger wiper blade size comes down to three answers. Pre-2011 utes take 18 and 18. PX1 through PX3 take 24 and 16. The Next-Gen PX4 takes 25 and 17.

The only year that needs a second look is 2011, and the only other year worth checking twice is 2022, because both are changeover years. Match your chassis code to the table, order the right pair, and you are done in under a minute of fitting time. Clear glass, no smear, no guesswork.