Hyundai i30 Wiper Blades Size Full Table for All Years (2007-2026)
The Hyundai i30 wiper blade size depends on which generation you drive, and the difference matters more than you’d think. A 2008 hatch takes a completely different seat than a 2020 model. Fit the wrong length and you get streaks, missed patches, or a blade that slaps against the windscreen trim. If you’ve been searching for the Hyundai i30 2009 wiper blade size or trying to work out your Hyundai i30 rear wiper blade size, this guide gives you the exact answer in seconds.
Below you’ll find a full-size table covering every i30 sold in Australia, from the original FD hatch and wagon through to the current PD hatch, i30 sedan, and i30N. Each row links to the exact-fit Premio Wipers set for that model, so once you spot your year, you’re one click from blades that snap straight on. No measuring. No guesswork.
Hyundai i30 Wiper Blades Size Table by Model Year
Here’s every i30 generation with its front driver, front passenger, and rear wiper blade sizes in both inches and millimeters:
| Model & Years | Chassis | Front Driver | Front Passenger | Rear | Exact-Fit Blades |
| i30 Hatch 2007–2012 | FD | 24″ / 600 mm | 18″ / 450 mm | 12″ / 300 mm | Shop i30 FD Hatch |
| i30 Wagon 2009–2012 | FD | 24″ / 600 mm | 18″ / 450 mm | 12″ / 300 mm | Shop i30 FD Wagon |
| i30 Wagon 2012–2017 | GD | 26″ / 650 mm | 14″ / 350 mm | 13″ / 325 mm | Shop i30 GD Wagon |
| i30 Hatch 2017–2026 | PD | 26″ / 650 mm | 16″ / 400 mm | 12″ / 300 mm | Shop i30 PD Hatch |
| i30 Sedan 2022–2026 | CN7 | 26″ / 650 mm | 16″ / 400 mm | — | Shop i30 CN7 Sedan |
| i30N Fastback 2017–2026 | PDe.3 | 26″ / 650 mm | 16″ / 400 mm | — | Shop i30N Fastback |
| i30N Sedan 2022–2026 | CN7.V1 | 24″ / 600 mm | 18″ / 450 mm | — | Shop i30N Sedan |
Notice the pattern. Early FD models run a 24-inch and 18-inch front pair. Later generations mostly stretch the driver side to 26 inches and shorten the passenger side. That’s why blades from your old i30 won’t carry over to a newer one.
Hyundai i30 2009 Wiper Blades Size (FD Models)
The 2009 i30 sits in the FD generation, so the Hyundai i30 2009 wiper blade size is 24 inches (600 mm) on the driver side and 18 inches (450 mm) on the passenger side. The rear blade is 12 inches (300 mm).
This applies whether you drive the hatch or the wagon. Both body styles share the same windscreen and wiper arm setup, and both use a standard U-hook connector. That’s the most common arm type on the road, so replacement blades click on in under a minute with no tools.
One thing to watch: some aftermarket listings lump the FD in with later models and suggest a 26-inch driver blade. That’s too long for the FD windscreen. Stick with 24/18 and you’ll get full coverage without the blades clashing at the top of the sweep.
Hyundai i30 Rear Wiper Blade Size Explained
The Hyundai i30 rear wiper blade size changes by generation, and not every i30 has one:
The FD hatch and wagon (2007–2012) and the PD hatch (2017–2026) use a 12-inch (300 mm) rear blade. The GD wagon (2012–2017) steps up slightly to 13 inches (325 mm). The i30 Sedan, i30N Sedan, and i30N Fastback cars have no rear wiper at all, which is normal for sedan and fastback body styles.
Rear blades wear out slower than fronts because they’re used less. But they also get baked by the sun while parked, so the rubber can crack and harden even without heavy use. If your rear blade drags or chatters, replace it at the same time as the fronts. A front and rear kit sorts both in one order.
How to Check and Replace Your i30 Wiper Blades
Confirm your model year and connector type.
Your build year is on the compliance plate inside the driver’s door frame. Match it against the table above, then check the arm. Every i30 uses a hook-style arm, so any Premio set for your model connects straight on. No adapters needed.
Signs your blades are due
Streaking, squeaking, skipping, or a hazy film that smears instead of clearing. Australian heat and UV are brutal on wiper rubber, so most blades last 6 to 12 months here. Teflon-coated beam blades hold their edge longer than basic frame blades and stay quieter through the full sweep.
Fitting takes under a minute.
Lift the arm, press the release tab, slide the old blade off, and click the new one on. Done. No tools, no mechanic, no drama.
Wiper Blades for Other Hyundai Models
Driving something else in the Hyundai family, or replacing blades on a second car? These exact-fit sets are ready to go:
| Model | Years |
| Tucson (NX4) | 2021–2024 |
| Tucson (TL) | 2015–2020 |
| Kona (OS) | 2017–2025 |
| Santa Fe (TM) | 2018–2024 |
| Elantra (AD) | 2015–2023 |
| Accent (RB) Hatch | 2011–2025 |
| ix35 (LM) | 2010–2015 |
| i20 (PB) | 2010–2015 |
| i40 (VF) Wagon | 2011–2018 |
| Ioniq 5 | 2021–2025 |
| Getz (TB) | 2002–2005 |
| iLoad (TQ) | 2008–2025 |
Older Hyundais are covered too, from the Excel and Lantra through to the Sonata range.
Conclusion
Getting the Hyundai i30 wiper blade size right comes down to knowing your generation. FD models run 24/18 up front, GD and PD models move to a 26-inch driver blade, and rear sizes sit at 12 or 13 inches depending on the body.
Match your build year to the table, grab the exact-fit set for your model, and you’ll have clear glass in under a minute. Every Premio set ships free Australia-wide with a 1-year warranty and a 90-day money-back guarantee, so there’s zero risk of ending up with the wrong size.
Frequently Asked Questions
What size wiper blades does a Hyundai i30 use?
It depends on the generation. The 2007–2012 FD models use a 24-inch driver and 18-inch passenger blade. The 2017–2026 PD hatch and i30 sedan use a 26-inch driver and 16-inch passenger blade. Check the size table above for your exact year.
What size are the wiper blades on a 2009 Hyundai i30?
The 2009 i30 takes a 24-inch (600 mm) driver blade, an 18-inch (450 mm) passenger blade, and a 12-inch (300 mm) rear blade. This covers both the FD hatch and FD wagon.
Does the Hyundai i30 have a rear wiper?
The i30 hatch and wagon do. The rear blade is 12 inches on FD and PD models and 13 inches on the GD wagon. The i30 Sedan, i30N Sedan, and i30N Fastback don’t have a rear wiper.
How do I know which wiper blades fit my i30?
Check your build year on the compliance plate inside the driver’s door frame, then match it to the size table. All i30 models use a standard hook-style arm, so exact-fit blades click on without adapters or tools.
How often should I replace Hyundai i30 wiper blades?
Every 6 to 12 months in Australia. UV and heat break down wiper rubber faster here than in cooler climates. Replace them sooner if you notice streaking, squeaking, or skipping across the glass.
